Babylock Denim Pro Sewing Machine Threading Instructions?

This tutorial teaches how to thread a Baby Lock sewing machine using a drop-in bobbin. The process involves finding the threading diagram on the front of the machine, placing the spool of thread on top of the spool pin, and winding the bobbin. The process requires collecting all necessary materials, including the spool of thread, scissors, and seam ripper. Older Baby Lock sewing machines must be threaded manually, and the tutorial provides a step-by-step guide to achieve flawless stitches.

To thread a machine, place the twin needle in the machine with the flat side toward the back, ensuring it is in the highest position. Place one spool on the normal spool holder and the second thread on the second thread. If the thread is not picking up the lower thread, check the type of thread and replace it if necessary.

A customer reported that their Baby Lock Denim Pro would not pick up the lower thread due to different sized thread caps. The manual advises using a cap larger than the thread spool to prevent this issue. After the bobbin winds a few turns, stop the machine and cut the thread as close to the hole as possible.

The tutorial also features a built-in needle threader, adjustable stitch length, free arm sewing, built-in accessory storage, electronic foot control, and a convenient thread cutter.